Complete Mining WAEC Syllabus for this years examination. WAEC candidates for GCE (External) and candidates for SSCE (Internal) are reminded to use this syllabus to prepare for their examination. Click here "WAEC Syllabus" to get the rest of the subjects.
Click here to get the PDF Copy on your device (Mobile phone or desktop computers).
We advise that candidates should be aware of the WAEC examination time table on time in order to prepare very well for the forth coming examination.
We advise that candidates should be aware of the WAEC examination time table on time in order to prepare very well for the forth coming examination.
If you have any question(s) regarding WAEC Result or WAEC exams in general, kindly visit the WAEC FAQ's & A's section of this blog before panicking.
The importance of this WAEC Syllabus can never be undermined. Hence, it's advisable to stick to your books as well as this syllabus for highlights and concentration areas. It is also advisable that students becomes aware of the WAEC grading system to know what grade they are exactly aiming for.
See also the WAEC exams rules and regulations and how to grow thick skin for it.
You will certainly need to check out this useful tips of how to pass WAEC exams at one sitting.
You will certainly need to check out this useful tips of how to pass WAEC exams at one sitting.
Mining WAEC Syllabus
Below is this year’s WAEC syllabus for Mining. Note that this syllabus is for both Internal and external candidates.
Paper 1: will consist of forty multiple choice objective questions all of which are to be answered in 40 minutes for 40 marks.
Paper 2: will comprise two sections, Section A and Section B as follows:
Section A: will consist of 10 short structured questions covering the entire syllabus. All the questions should be answered in 40 minutes for 40 marks.
Section B: will consist of five essay-type questions from which candidates are to answer any three questions for 60 marks in 1 hour 25 minutes.
LIST OF FACILITIES AND MAJOR EQUIPMENT/MATERIALS REQUIRED
SUGGESTED READING LIST
Damisa, E.O.A. (2010): Introduction to Mining, published by Spectrum Books Ltd.
Gregory, C.E. (1983): Rudiments of Mining Practice, Trans Tech Publications, Zellerfled- Germany.
Damisa, E.O.A. and Tsaro, G.D.A. (2011): Introduction to Mineral Processing, Published by Spectru Publishers.
Davou, D.D. (2012): Introduction to Geology, Published by Spectrum Publishers.
Mallo, S.J. and Nwude, B.O. (1998): Introduction to Shaft Sinking.
Mallo,S.J. (1998): Minerals and mining on the Jos Plateau. Published by ACON, Jos.
Hartman, L.M.(2002):Introduction to Mining Engineering.
Fred, B.G & Laurence J.D.(2006): Mining and its impact on the environment.
Wills B.A. &Munn,T.N. (2006):Wills Mineral Processing Technology. Published by Elsevier.
Fuestenau M.C. & Han, K.N. (2003): Principles of Mineral Processing, Published by Society
of Mining, Metallurgy and Exploration.
Hartman, L.M. (1992): SME Mining Engineering Handbook, Vol. 1 & 2, Second Edition.
Littleton, Colorade: Society for Mining, Metallurgy and Exploration Inc(SME).
Mukerjee, P. K. (2005): A Textbook of Geology. Kolkuta. The World Press.
Chermcoff, S. & Whitney, D. (2007): Geology: An Introduction to Physical Geology. Fourth
Edition. Pearson International. New Jersey.
Reminder: How to pass WAEC Exams with flying colours
 |
| Mining WAEC Syllabus |
PREAMBLE
This syllabus is designed to evaluate the candidates’ knowledge of the basic principles and practices in the mining industry with a view to developing their interest in the business of mining. It provides opportunities for the acquisition of comprehensive knowledge, attitudes and skills which will stimulate students’ entrepreneurial interest and practice in mining.AIM AND OBJECTIVES
The examination will test candidates’ ability to:- explain the basic concepts associated with mining;
- acquire the basic knowledge of rocks and minerals;
- recognize the special properties and values of gems and precious minerals;
- explain the methods of extraction of minerals;
- explain the processing of minerals to useful products;
- appreciate the importance of health, safety and environment in the mining industry;
- develop requisite skills for, and business attitudes to mining.
FIELD WORK
The students should be exposed to field work through excursions to mining industry sites such as coal mines, oil derricks, petroleum refineries, industries, oil spill sites, comminution sites, tailing sites etc on which they should be examined as part of their continuous assessment in schools. The scores for the field work should account for 40 percent of the total continuous assessment scores of the students that will be forwarded to the examining body.EXAMINATION SCHEME
There will be two papers-1& 2 both of which must be taken as a composite paper in one sitting for a duration of 2 hours 45 minutes.Paper 1: will consist of forty multiple choice objective questions all of which are to be answered in 40 minutes for 40 marks.
Paper 2: will comprise two sections, Section A and Section B as follows:
Section A: will consist of 10 short structured questions covering the entire syllabus. All the questions should be answered in 40 minutes for 40 marks.
Section B: will consist of five essay-type questions from which candidates are to answer any three questions for 60 marks in 1 hour 25 minutes.
DETAILED SYLLABUS
| CONTENTS | NOTES |
| (A) INTRODUCTION TO MINING
|
(a) Meaning and branches of mining
(b) Terminology used in mining (c) Classification and importance of mineral (d) Distribution of minerals in Nigeria (e) History of mining (f) Mining activities in Nigeria (g) Importance of minerals to man and national economy |
| CONTENTS | NOTES |
|
(B) BASIC GEOLOGY (C) STAGES OF DEVELOPMENT IN MINING (BASIC CONCEPTS) |
(h) Minerals markets and cartels
(i) Mine accounting and sources of finance for mining ventures (j) Aspects of Nigerian minerals and mining Act, 2007 (k) Mining titles acquisition (a) Definition of Geology and its scope (b) Relationship between Geology and Mining (c) Structure of the Earth (d) Relative abundance of elements in the Earth’s crust (e) Economic mineral potentials of Nigeria (f) Rocks and rock types ( igneous, sedimentary and metamorphic) (g) Rock-forming minerals (h) Physical and chemical properties of rock-forming minerals (i) Rock cycle (j) Weathering (k) Simplified geological map of Nigeria (l) Mineral map of Nigeria (m) Collection and collation of geological data (n) Interpretation of topographical and geological maps (o) Drawing of simple geological cross-section (a) Classification of mining methods ( Surface and underground mining methods) (b) Choice of mining methods: Reasons for choosing surface or underground mining methods (c) Surface mining methods: quarrying, open pit mining, open cast mining, alluvial mining etc (d) Underground mining methods: room-and-pillar, longwall, cut-and-fill, shrinkage, block caving, sub-level etc (e) Comparison of surface and underground mining methods (f) Justification of choice of methods (g) Prospecting stage: meaning and outlines of prospecting techniques e.g. geological technique, geophysical technique, geochemical technique, remote sensing technique (h) Exploration stage: meaning and classification of exploration techniques (e.g. geological technique, geophysical technique, geochemical technique, remote sensing technique) (i) Meaning of feasibility study of a mining venture (j) Financial analysis in mining (k) Meaning of a mine, mine development, mineral processing design, mill design, mining as actual exploitation, list of unit operations in mining e.g. drilling, blasting etc. (l) Need for mineral processing, economic benefits of mineral processing, list of unit operations in mineral processing (m) Meaning and processes of metal extraction e.g. smelting (pyrometallurgy), hydrometallurgy and electrometallurgy |
| CONTENTS | NOTES |
| (D) MINING METHODS
(E) INTRODUCTION TO MINERAL PROCESSING (F) GEMOLOGY AND LAPIDARY |
(a) Surface mining methods:
(i) open pit as an example of surface mines, features of an open pit mine, minerals mined by open pit method (ii) Open cast mine as example of surface mine, features of an open cast mine (iii) Quarrying and Dimension Stones production: Meaning, products of quarrying, uses of products, unit operations of a quarry, flow sheet of the operations of a quarry (iv) Dimension stone production (vi) Minerals that are mined by open cast method (b)Underground mining methods: (i) Features of an underground mine (ii) Basic concepts of underground mining methods e.g. square setting, cut-and-fill, shrinkage, sub-level, long-hole, open long-hole, block-caving, open- cut (c) Sea-floor mining (d) Moon and asteroid mining (e) Materials handling equipment e.g. conveyor belt, trucks, pay-loader etc (a) Meaning of: Mineral processing, comminution terms, concentration terms, mill accounting terms (b) Properties of minerals employed in mineral processing e.g. specific gravity, magnetism etc (c) Main operations in mineral processing i.e. comminution and concentration (d) Products of mineral processing e.g. concentrate and tailings, middling (intermediate product), dewatering in mineral processing, auxiliary operations, tailings disposal (a) Meaning of gemology and lapidary (b) Machines and tools in gemstone processing e.g. faceting machine, grinding machine, polishing machine, etc (c) Meaning and properties of gemstones (d) Types of gemstones based on shape, colour, size, refractive index etc. (e) Characteristics and methods of identification of gemstones; quality of gemstones (f) Unit of measurement of gemstones, prices of gemstones (g) Marketing and prices of gemstones |
| CONTENTS | NOTES |
| (G) HEALTH, SAFETY AND ENVIRONMENT
|
(a) Health hazards in mining
(b) Safety requirements/measures in mining (c) Impacts of mining on the environment (d) Safety equipment and apparels used in mining – personal protective equipment (PPE) (e) Common diseases associated with mining industry (f) Administering simple first aid, drugs/ dressing material (g) Guidelines for accident reporting, steps for environmental control (h) Basic issues in National policy on mineral development (i) Mining laws and regulations (j) Environmental protection laws (k) National policy on the environment |
LIST OF FACILITIES AND MAJOR EQUIPMENT/MATERIALS REQUIRED
| S/N | DESCRIPTION | QUANTITY |
| 1 | Spring balance | 2 |
| 2 | Fire extinguishers | 1 |
| 3 | Sand and water bucket | 1 |
| 4 | Specific gravity test apparatus(pycnometer) | 2 |
| 5 | Model of open pit mine | 1 |
| 6 | Model of underground mine | 1 |
| 7 | Samples of common rocks and minerals e.g. limestone, cassiterite | 5 |
| 8 | Samples of gemstone | 5 |
| 9 | Globe | 1 |
| 10 | Petrological microscope | 2 |
| 11 | Binocular microscope | 2 |
| 12 | Magnifying glass | 10 |
| 13 | Topographical maps | 5 |
| 14 | Geological maps | 5 |
| 15 | Chart of periodic table of elements | 1 |
| 16 | Thermometers | 5 |
| 17 | Electronic balance | 1 |
| 18 | Beakers | 5 |
| 19 | Cylinders | 5 |
| 20 | Petri dishes | 5 |
SUGGESTED READING LIST
Damisa, E.O.A. (2010): Introduction to Mining, published by Spectrum Books Ltd.
Gregory, C.E. (1983): Rudiments of Mining Practice, Trans Tech Publications, Zellerfled- Germany.
Damisa, E.O.A. and Tsaro, G.D.A. (2011): Introduction to Mineral Processing, Published by Spectru Publishers.
Davou, D.D. (2012): Introduction to Geology, Published by Spectrum Publishers.
Mallo, S.J. and Nwude, B.O. (1998): Introduction to Shaft Sinking.
Mallo,S.J. (1998): Minerals and mining on the Jos Plateau. Published by ACON, Jos.
Hartman, L.M.(2002):Introduction to Mining Engineering.
Fred, B.G & Laurence J.D.(2006): Mining and its impact on the environment.
Wills B.A. &Munn,T.N. (2006):Wills Mineral Processing Technology. Published by Elsevier.
Fuestenau M.C. & Han, K.N. (2003): Principles of Mineral Processing, Published by Society
of Mining, Metallurgy and Exploration.
Hartman, L.M. (1992): SME Mining Engineering Handbook, Vol. 1 & 2, Second Edition.
Littleton, Colorade: Society for Mining, Metallurgy and Exploration Inc(SME).
Mukerjee, P. K. (2005): A Textbook of Geology. Kolkuta. The World Press.
Chermcoff, S. & Whitney, D. (2007): Geology: An Introduction to Physical Geology. Fourth
Edition. Pearson International. New Jersey.
Reminder: How to pass WAEC Exams with flying colours
No comments:
Post a Comment
If you have any comment, kindly use the comment box and check back to see our reply. We will make sure to reply your comment no matter how dumb it is.
Also share this information with your friends in school and home on Facebook, Twitter, etc.
Join our Secret Google+ Page and Facebook Page for Help and Contributions